A leading manufacturer of valves, pumps and manifolds― Takasago Electric, Inc.

A change in operating frequency affects pumped volume and repeatability. When the operating frequency is higher than the value specified on a drawing, repeatability decreases. An example of measured changes in repeatability resulting from varying operating frequencies is shown in the table below.

Model number used: NRP-500P
Measurement conditions: 
The pumped volume is set at 500mm³ when the operating frequency is 2Hz.
(Other than the conditions specified below, the measurements follows the standard test conditions.)

Experimental data of repeatability versus operation frequency

　(*  Upper row： error of the max. value,  Lower row： error of the min. value)