List of Diaphragm Solenoid Valves | A leading manufacturer of Diaphragm Solenoid Valves

directory HOME > Products > Valves > Diaphragm

Welcome to Takasago Electric, Inc., a leading manufacturer of valves, pumps and manifolds

Products

Valves
- Solenoid Valves
- Others
  - Air Operated Valves
  - Shape Memory Alloy Valve
Pumps
- Small Syringe Pumps
  - Pen-Type Syringe Pumps
- Transfer pump
  - Piezoelectric Micro Pumps
  - Peristaltic Pumps
- Metering Pumps
  - Metering Pumps
Manifolds and Chips
- Manifolds
- Chips
  - Film Chips
  - Bonded Plastic Chips
Others
- Fittings
  - Fittings for PTFE tubing

Diaphragm Isolated Valves

The valve part and the actuator part (solenoid) of these valves are sectioned by a diaphragm so the fluid does not come into contact with the metal parts of the solenoid. The wetted materials are PTFE, PEEK, or PPS, etc so as to be compatible with a wide range of fluids.

List of Diaphragm Isolated Valves

FV series
The size of this valve is just 4.2mm square. This is an innovative and groundbreaking ultra-small solenoid-driven diaphragm isolated valve. The internal volume is now only 1.1μl - contributes to reductions in reagent and improvements in accuracy.

Orifice diameter	0.4mm
IN port pressure	0 ～ 100 kPa
Power consumption	1～1.2W
Outer dimensions	4.2 x 4.2 x 23.1mm

FLV series
This valve is a latching solenoid valve in which the open and closed status of the valve is maintained by magnetic force. Contributes low power consumption, because electricity is consumed only when energized. With the size of 4.2 mm square, it is an innovative and groundbreaking ultra-small solenoid valve of an internal volume just 1.1μl. This valve is suitable for micro fluidic control.

Orifice diameter	0.4mm
IN port pressure	0 ～ 100 kPa
Power consumption	2.4～3W(when energized)
Outer dimensions	4.2 x 4.2 x 23.1mm

KV series
A diaphragm isolated valve of width just 6mm. substantial shortening of the flow-path between ports and reduction in mounting space are made possible by the manifold-mountable type. The internal volume is just 10 micro liters on both the IN and OUT port.

Orifice diameter	0.8mm
IN port pressure	0 ～ 100 kPa
Power consumption	1.8W
Outer dimensions	6.0 x 50.0 x 12.5mm

LV series
This manifold mountable diaphragm valve is just 8.9 x 10.4mm, giving a footprint of less than 1cm2. It simultaneously realizes a very small internal volume of 3.3μl at the IN port and 8.3μl at the OUT port, and a shortening of the flow-path between ports.

Orifice diameter	0.8mm
IN port pressure	0 ～ 100 kPa
Power consumption	1.2W
Outer dimensions	8.9 x 10.4 x 28mm

EXAK series
This is a zero-pumping volume type of diaphragm isolated valve. Fluoropolymer is used for all of the wetted parts giving it great chemical compatibility. The outer dimensions are a very compact φ12.0 x H 48.1 (mm).

Orifice diameter	0.8mm
IN port pressure	-40 ～ 100 kPa
Power consumption	0.94W
Outer dimensions	12 x 26.0 x 35.45mm

EXAKN series
This is a zero-pumping volume type of diaphragm isolated valve. Perfluoroelastomer is used for the seal part and the valve has increased sealing ability. The outer dimensions are a very compact φ14.0 x H 42.3 mm.

Orifice diameter	0.8mm
IN port pressure	-40 ～ 300 kPa
Power consumption	1.2W
Outer dimensions	φ14.0 x 42.3mm

EXV series
This is a diaphragm isolated manifold mountable valve with a moulded body. it is small with dimensions of W 14mm x H 32mm. You can choose the body material from the highly chemically resistant PEEK or PPS.

Orifice diameter	1.0mm
IN port pressure	-20～200kPa
Power consumption	2.8W
Outer dimensions	14.0 x 25.0 x 31.7mm

STV series
This is a diaphragm isolated valve of outer dimensions φ20.0 x 42.5 mm. Highly chemically compatible materials PTFE, PEEK, PPS, etc. are available for the valve body material. This valve is a popular model among small inert solenoid valves and is playing an active role in a wide range of applications.

Orifice diameter	1.0～1.2mm
IN port pressure	-50 ～ 200 kPa
Power consumption	1.7～2.9W
Outer dimensions	φ20.0 x 42.5mm

XTA series
This is a diaphragm-isolated valve with a microcomputer control circuit built in as standard. By making use of the characteristics of the control circuit, we have added types of valve possessing various features to this series, such as a silent type, high pressure type, and low power consumption type. Various body materials and port connections including a manifold-mountable type are available. While the open frame solenoid gives the XTA series a good cost performance, it is also covered by a stainless steel case of refined design.

Orifice diameter	1.2 ～ 2.0mm
IN port pressure	-50 ～ 600kPa
Power consumption	0.8 ～ 3.1W
Outer dimensions	24.0 x 20.6 x 53.9mm

MTV series
This valve has the outer diameter Φ26.0 mm and represents TAKASAGO brand.The PTFE machined diaphragm has a high chemical compatibility. There are a wide variety of valve bodies such as moulded bodies or machined bodies, thread port connections or hose barbconnections, etc.

Orifice diameter	1.0～2.0mm
IN port pressure	-100 ～ 600 kPa
Power consumption	1.9～4.4W
Outer dimensions	φ26.0 x 57mm

JTV series
This is a miniature 2-way elastomer diaphragm isolated valve. The hose barb connection enables you to connect silicone tubing directly to the valve.

Orifice diameter	1.2mm
IN port pressure	0 ～ 80 kPa
Power consumption	1.0W
Outer dimensions	φ14.5 x 34.1mm

WTA・WTB series
For the purpose of cost reduction, this valve adopts a open framed solenoid, which is covered by a plastic case.

Orifice diameter	1.6 ～ 2.0 mm
IN port pressure	-90 ～ 200 kPa
Power consumption	2.8 ～ 3.4 W
Outer dimensions	W27.5 ～ 28.2 x L24 ～ 24.5 x H47 ～ 61.7 mm

WLB series
This valve is a latching solenoid valve. Electricity is consumed when energization is only required just an instant opening or closing, so heat generation is very limited.

Orifice diameter	2.0mm
IN port pressure	-50 ～ 200 kPa
Power consumption	8.0W (when energized)
Outer dimensions	25.0 x 26.0 x 55.9mm

MCV series
This is an elastomer diaphragm isolated valve with an diameterφ26.0mm. There are a wide variety of body materials or port connections etc.

Orifice diameter	2.0mm
IN port pressure	-27～100 kPa
Power consumption	2.6W
Outer dimensions	φ26.0 x 48.7mm

MLV series
The outer dimensions of this diaphragm isolated valve are φ30.0 x 57.2 mm(mm). The PTFE machined diaphragm has a high chemical compatibility. The port connection can be selected from M8, 5/16-24UNF, Rc1/8 and 1/8-27NPT.

Orifice diameter	2.5mm
IN port pressure	-40 ～ 200 kPa
Power consumption	3.1～4.4W
Outer dimensions	φ30.0 x 57.2mm

ACV series
This is a 2-way valve with a moulded actuator, a moulded body and an elastomer diaphragm. The port connections are the hose barbs to which silicone tubing can be connected directly.

Orifice diameter	3.0mm
IN port pressure	-55 ～ 100 kPa
Power consumption	5.0W
Outer dimensions	34.0 x 47.0 x 62.0mm

YTV series
The outer dimensions of this diaphragm isolated valve are 40 x 40 x 90 mm. A PTFE machined diaphragm is used in this valve with 2-way and 3-way versions available.

Orifice diameter	3.0mm
IN port pressure	-100 ～ 150 kPa
Power consumption	5.0W
Outer dimensions	40.0 x 50.0 x 77.0mm

DTV series
The orifice diameter of this diaphragm isolated valve is φ3-4mm and the outer dimensions are 42.0 x 36.0 x 74.5 mm. Increasing the percentage of about 60 % of the parts used for this valve are purchased from China, enabling an excellent cost performance.

Orifice diameter	4.0mm
IN port pressure	-90 ～ 200 kPa
Power consumption	5.0～7.0W
Outer dimensions	36 x 42.0 x 74.5mm

NPV series
This is a proportional diaphragm valve for chemical fluids whose flow is controllable by changing the input voltage. It has a comparatively large orifice diameter of 4mm. It has excellent chemical compatibility because PTFE is used for all the wetted parts.

Orifice diameter	4.0mm
IN port pressure	0 ～ 100 kPa
Power consumption	7W(at 24 VDC)
Outer dimensions	φ40 × Ｌ95 mm

NRV series
The orifice diameter of this diaphragm isolated valve is φ4-6 mm. Valve bodies machined from a variety of materials are available. Select the port connection from Rc1/4, 1/4-15NPT, Rc1/8, 1/8-27NPT.

Orifice diameter	4.0～6.0mm
IN port pressure	-90 ～ 200 kPa
Power consumption	5.5～10.0W
Outer dimensions	φ44.0～45.0 x 80.0～84.0mm

PKV series
This is a diaphragm isolated valve with a wide range of orifice diameters from φ3.5 - 6mm and outer dimensions of 66.0 x 45.0 x 75.0mm. The standard materials are PEEK for the body and PTFE for the diaphragm.

Orifice diameter	4.0～6.0mm
IN port pressure	-90～200kPa
Power consumption	6.0～21.0W
Outer dimensions	40.0 x 42.0 x 71.0mm

HTV series
This 2-way diaphragm isolated valve has a large orifice diameter of φ10.0mm. The PTFE machined diaphragm used for this model has a high chemical compatibility.

Orifice diameter	10.0mm
IN port pressure	-90 ～ 100 kPa
Power consumption	10W
Outer dimensions	60.0 x 75.0 x 124.0mm

Diaphragm Isolated Valves | Our field of expertise is miniature and highly chemically inert solenoid valves.

Welcome to Takasago Electric, Inc., a leading manufacturer of valves, pumps and manifolds

Diaphragm Isolated Valves

List of Diaphragm Isolated Valves